Discs, bushings & sleeves

several spacer discs, bushings, guide bushings & sleeves
spacer disc s = 5,20 mm
D = 105,00mm
d = 75,00mm
s = 5,20mm
Price on request
 
spacer disc s = 10,00 mm
D = 105,00mm
d = 75,00mm
s = 10,00mm
Price on request
 
guide bush
D1 = 25,00mm | D2 = 17,00mm
d = 12,55mm
s1 = 7,00mm | s2 = 2,20mm
Price on request
 
spacer disc s1 = 7,95 mm
D1 = 113,75mm | D2 = 104,25mm
d = 91,95mm
s1 = 16,95mm | s2 = 7,95mm
Price on request
 
spacer bush with inside bevel for O-ring s5
D = 109,90mm
d = 100,00mm
L = 70,00mm
Price on request
 
spacer bush with groove and slide bush
D = 50,00mm
d = 35,10mm
L= 35,00mm
Price on request
 
spacer disc s = 2,00mm
D = 54,00mm
d = 36,70mm
s = 2,00mm
Price on request
 
base bushing
D1 = 140,00mm | D2 = 99,00mm
d = 78,00mm
s1 = 40,00mm | s2 = 8,00mm
Price on request
 
spacer disc
D1 = 113,00mm | D2 = 90,00mm
d = 85,00mm
s1 = 25,00mm | s2 = 9,00mm
Price on request
 
safety bushing
D = 91,00mm
d = 72,00mm
s = 25,50mm
Price on request
 
bushing Permaglide PAP 3040 P10
P10 = sliding layer of PTFE and lead, steel backing, maintenance-free for dry running
Price on request
 
thrust washer PAW26 P10
length 1,5mm
sliding layer of PTFE and lead, steel backing, maintenance-free for dry running
Price on request
 
thrust washer PAW32 P10
length 1,5mm
P10 = sliding layer of PTFE and lead, steel backing, maintenance-free for dry running
Price on request
 
spacer disc s = 3,00mm
D = 95,00mm
d = 60,00mm
s = 3,00mm
Price on request
 
spacer disc s = 4,00mm
D = 95,00mm
d = 60,00mm
s = 4,00mm
Price on request
 
spacer disc s = 5,00 mm
D = 95,00mm
d = 60,00mm
s = 5,00mm
Price on request
 
end ring with groove for O-Ring
O-Ring s = 8-10mm
D1 = 190,00 | D2 = 141,90mm
s1 25,00mm | s2 = 8,00mm
Price on request
 
bushing Permaglide 2525 DUB C9A
out of bronze
D = 28,40mm
d = 25,50mm
L = 19,50mm
Price on request
 
bushing Permaglide 22020 DU B8A
L = 20,00mm
D = 23,00mm
d = 20,00mm
Price on request
 
Show 1 to 20 (from a total of 43 products)

What are bushings, washers, sleeves or other turned parts used for?

Such turned parts are used in almost every machine. For example, sleeves are used as shaft protection. Washers are used to either limit a seal or to separate other attachments from each other. An example of this would be the so-called end plate on the very popular E1K stripper, which limits the stuffing box packing from the inside of the housing.
Thrust washers and sliding bushes

We also have thrust washers and plain bushes or plain bearings in our range.

Thrust washers are axial bearings in a very flat design. So they are easy to plan, take up high axial loads and are largely maintenance-free.
The same applies to plain bearings.