Papier Tissue Maschine 2060mm
A general description of MP3
General information:
Maximum performance with which the machine worked with sheet width 2060 [mm] 39 [ton / day]
Design speed 500 [m / min]
The speed at which she worked 360 - 400 [m / min] depending on the weight.
The range of basis weights produced 30 - 60 gsm
Width of the sheet after aheadbox 2200 [mm].
1. Yankee cylinder:
Cast iron material
Diameter 3200 [mm]
Width 2320 [mm]
Width of the dried sheet 2200 [mm]
Maximum working pressure 4.5 [bar]
Drive: motor 160 [kW] + mechanical transmission + clutch to compensate for elongation in the axial direction, controlled by an inverter,
Bearings lubricated with oil - forced circulation
Lubrication station
Shaft blindly drilled diameter 600 [mm]
Cleaning doctor
Creping doctor
2. Hood - steam heating, 3 steam heaters inside the hood, + heat recuperation system, air heating coil before entering the cover. 3 fans forcing the air inside the hood, 2 fans in the recuperation system.
3. Post Drying section:
Four cylinders of the drying group.
Cylinder diameter 1500 [mm]
Width 2300 [mm]
Maximum working pressure 2.5 [bar]
Bottom cylinders adapted to work with dryers
The upper cylinders have covers, in the caps the steamers are installed, maximum pressure 12 [bar], 2 fans forcing the air inside the hood.
4. Vacuum system:
- UHLE - CNN 2000 CUTES vacuum pump 2015 530 n / 1 75 kW production year 2015 + separator + CUTES CKD 25 extraction pump
- pick up - vacuum pump CNN 2000 CUTES 2015r 5450 n / 1 55 kW production year 2015
- high pressure suction for forming fabric AL3250AZ - year of production 2014.
5. Press system - single roll blindly drilled with diameter 600 [mm], roll with drive: 55 [kW] engine + inverter + mechanical transmission. Pressing system pneumatic.
Spare press roll,
Spare roll for felt loop
6. fourdriner year 2009.
Length 7300 [mm]
Overall width 2400 [mm]
Drive: motor 55 [kW] + mechanical transmission (production year 2016) + inverter.
Ceramic foils (ceramics from cancer 2016)
High vacuum section - ceramic cladding
Spare chest roll
Spare drive roll
One spare loop roll.
7. Pope: that has a cutting station - the option of formatting into any size 3 sets (knife holder and sleeve) are mounted on the device.
8. The scanner for weight and humidity measurement - HONEYWELL - has not worked for 3 years.
9. Approach flow (see pictures)
H7 - the first mixing pump
BELOIT Hydrocyclones
H 10 - supply pump for sander Recovery of hydrocyclones fibers)
H 11 - fan pump 14 000 [L/min]
Pressure sorter COMER
The mass compensator COMER
COMER infusion.
10. Steam feeding system:
Yankee Cylinder: Thermocompressor - cylinder - separator -
Post drier group - common for 4 cylinders - compressor - cylinders – separator
11. UTM with pump.
General information:
Maximum performance with which the machine worked with sheet width 2060 [mm] 39 [ton / day]
Design speed 500 [m / min]
The speed at which she worked 360 - 400 [m / min] depending on the weight.
The range of basis weights produced 30 - 60 gsm
Width of the sheet after aheadbox 2200 [mm].
1. Yankee cylinder:
Cast iron material
Diameter 3200 [mm]
Width 2320 [mm]
Width of the dried sheet 2200 [mm]
Maximum working pressure 4.5 [bar]
Drive: motor 160 [kW] + mechanical transmission + clutch to compensate for elongation in the axial direction, controlled by an inverter,
Bearings lubricated with oil - forced circulation
Lubrication station
Shaft blindly drilled diameter 600 [mm]
Cleaning doctor
Creping doctor
2. Hood - steam heating, 3 steam heaters inside the hood, + heat recuperation system, air heating coil before entering the cover. 3 fans forcing the air inside the hood, 2 fans in the recuperation system.
3. Post Drying section:
Four cylinders of the drying group.
Cylinder diameter 1500 [mm]
Width 2300 [mm]
Maximum working pressure 2.5 [bar]
Bottom cylinders adapted to work with dryers
The upper cylinders have covers, in the caps the steamers are installed, maximum pressure 12 [bar], 2 fans forcing the air inside the hood.
4. Vacuum system:
- UHLE - CNN 2000 CUTES vacuum pump 2015 530 n / 1 75 kW production year 2015 + separator + CUTES CKD 25 extraction pump
- pick up - vacuum pump CNN 2000 CUTES 2015r 5450 n / 1 55 kW production year 2015
- high pressure suction for forming fabric AL3250AZ - year of production 2014.
5. Press system - single roll blindly drilled with diameter 600 [mm], roll with drive: 55 [kW] engine + inverter + mechanical transmission. Pressing system pneumatic.
Spare press roll,
Spare roll for felt loop
6. fourdriner year 2009.
Length 7300 [mm]
Overall width 2400 [mm]
Drive: motor 55 [kW] + mechanical transmission (production year 2016) + inverter.
Ceramic foils (ceramics from cancer 2016)
High vacuum section - ceramic cladding
Spare chest roll
Spare drive roll
One spare loop roll.
7. Pope: that has a cutting station - the option of formatting into any size 3 sets (knife holder and sleeve) are mounted on the device.
8. The scanner for weight and humidity measurement - HONEYWELL - has not worked for 3 years.
9. Approach flow (see pictures)
H7 - the first mixing pump
BELOIT Hydrocyclones
H 10 - supply pump for sander Recovery of hydrocyclones fibers)
H 11 - fan pump 14 000 [L/min]
Pressure sorter COMER
The mass compensator COMER
COMER infusion.
10. Steam feeding system:
Yankee Cylinder: Thermocompressor - cylinder - separator -
Post drier group - common for 4 cylinders - compressor - cylinders – separator
11. UTM with pump.
Kundenrezensionen
Leider sind noch keine Bewertungen vorhanden. Seien Sie der Erste, der das Produkt bewertet.
Sie müssen angemeldet sein um eine Bewertung abgeben zu können. Anmelden