very nice Contaminex CM10 / CM11
completely rebuilt
Stainless steel housing
Housing not bulged
for pulpers up to 26m³ approx.
As an effective retrofit element, the Contaminex CM easily disposes of all horizontal and vertical pulpers. It maintains the capacity of the pulper and significantly reduces downtimes due to cleaning downtimes.
Application:
The Contaminex - a unit for the removal of waste from pulpers - is used in the slushing of unsorted wastepapers. It may be employed both in conjunction with horizontal and with vertical pulpers. The Contaminex effectively removes foreign matter and thus ensures uninterrupted pulper operation.
Construction:
Single-piece vat with bolted cover; rotor; rotor shaft with antifriction bearings; compact bearing assembly bolted to the vat. Pneumatically actuated stock shut-off valve; electr. cycle control.
Operation:
In conjunction with a horizontal pulper, the Contaminex is connected to the ragger pipe. It draws out of the vortex centre of the pulper all impurities not suitable for spinning at the ragger strand, seperates them from the fibrous stock in the suspension and discharges them through a screen. An interval-controlled outlet valve makes it possible to match the dwell and pumping time of the predominantly large-area troublesome materials to the respective degree of contamination. Due to the movement of the ragger strand and flushing of the strand, the connection opening remains free from deposits.
When used on vertical pulpers, the Contaminex is connected to the vat in the reversing zone. The mode of operation is the same as on horizontal pulpers, but pulper filling water is introduced additionally to keep the connection opening clear.
